Attractions
Amusement rides are equipment intended for public entertainment, such as fairground rides and mechanical attractions, involving the controlled movement of passengers. They are designed to be installed and reused over time without loss of integrity, in settings such as theme parks, amusement parks and fairs, in both temporary and permanent installations.
Inspection activities are not limited solely to verifying the proper operation of the attraction, but also include verification of compliance with applicable technical and regulatory requirements throughout all stages of the life cycle: from design and manufacturing through to installation, operation and maintenance.
ECO Certificazioni carries out verification, inspection and technical control activities for manufacturers, managers and industry operators, with the aim of assessing the safety of amusement rides, compliance with applicable regulatory requirements and the proper management of technical documentation.
Through a structured and multidisciplinary approach, ECO Certificazioni provides qualified technical expertise to verify that amusement rides maintain appropriate levels of safety, reliability and compliance over time.
The service
The service is intended for operators of theme parks, permanent and travelling amusement parks and amusement ride manufacturers seeking to ensure high safety and regulatory compliance standards in accordance with the applicable technical standards and the provisions of Ministerial Decree of 18 May 2007, as amended.
The inspections adopt a comprehensive and integrated approach that covers the entire life cycle of the equipment: from design and manufacturing through to installation and operation, ensuring continuous monitoring of safety conditions and compliance with applicable regulations.
What needs to be done?
The manufacturer, operator or responsible party is responsible for ensuring that the amusement ride is designed, manufactured, installed, tested, maintained and operated safely throughout its entire life cycle.
To this end, compliance with the applicable technical standards must be ensured, together with local regulations and the instructions provided by the manufacturer, and documented periodic inspections must be planned and carried out to monitor the safety and operating conditions of the equipment over time.
What does the inspection involve?
Inspections may include document reviews, visual inspections, functional tests and technical assessments, depending on the type of amusement ride and the inspection stage.
Activities
Design review: assumptions, calculations, risk assessment, accelerations, classification and adoption of the appropriate restraint system, mechanical, hydraulic, pneumatic and electrical components, lifting equipment, rotation systems, slewing rings, vehicles and gondolas, decks, stairs and platforms, electrical and safety systems, etc., limitations and completeness of documentation, installation, operation and maintenance manuals
Production inspection: verification of the correct implementation of the design during the manufacture of components, including checks on materials, welds, heat treatments, dimensions, NDT, electrical and control systems, third-party equipment, fibreglass components, etc.
Initial inspection: on-site inspection of correct assembly and finishing (entrapment hazards, abrasions, safety and clearance areas, etc.).; Functional checks and tests under no-load, full-load and unbalanced-load conditions; Verification of sequential, forced and interlocked control systems; Verification of the operating pressures of hydraulic/pneumatic systems, pressure relief valves, electrical connections, correct positioning of field sensors and safety devices (e.g. anti-rollback devices); Verification of braking efficiency and passenger deceleration (including intrusion tests). Verification of proper operation under normal and emergency conditions (e.g. blackout); User information and signage.
Periodic inspection of parts subject to wear, damage, corrosion, material degradation or visible anomalies. Verification that the initially approved conditions are maintained (accelerations and decelerations), as well as interlocking and safety-related functional systems (e.g. restraint systems). Verification of control systems and safety devices, electrical, hydraulic and pneumatic systems; Instructions, limitations, signage; Retention and updating of maintenance records (activity log).
Technical report: preparation and delivery to the operator of a report covering the inspections, tests performed, results, findings and technical recommendations
We operate throughout Italy.
From North to South, we are ready to listen to you. Would you like us to call you back?
One of our sales representatives can call you with no obligation.
How often should the inspection be carried out?
The initial approval, including the design review, inspection during production and initial on-site inspection, must be carried out before the attraction is put into service.
It is also required in the event of:
modifications, replacements or changes to safety-critical components or parts;
changes to the profiles or layout of the installation;
relocation of the attraction to a new site.
The periodic inspection must be carried out annually to verify that the attraction continues to meet safety and conformity requirements over time.
When inspections are required:
New attraction: during design and manufacture, with an initial inspection before use
Temporary installation: before opening to the public
Permanent attraction: with scheduled annual periodic inspections
Significant modifications or work: after the work and before the attraction is put back into use
Anomalies, accidents or safety concerns: before reopening to the public
Extraordinary maintenance: after the work, if it may affect the safety of the attraction
Inspections
Amusement rides and playgrounds
Inspections of public and private playgrounds, playground equipment and impact-attenuating surfaces.
Inspections
Water quality testing
We provide professional and independent services to ensure the compliance of water systems in accordance with Legislative Decree of 23 February 2023.
Inspections
Water parks
Technical inspections of water slides, water play equipment and water park attractions.
ECO Certificazioni carries out technical assessments and inspections on amusement rides and devices, providing multidisciplinary expertise to verify safety, technical documentation, and compliance with applicable requirements.
FAT and SAT
For certain attractions, factory and on-site inspections may be required to verify operation and installation before they are opened to the public.
Inspections:
FAT - Factory Acceptance Test: inspections carried out at the factory before the attraction is shipped or delivered
SAT - Site Acceptance Test: inspection carried out on site to verify installation, operation and conditions prior to opening
The results of these activities may be documented through technical reports, test reports or other documentation required for the service requested.
Regulatory framework
The EN 13814 series is the main European technical reference for the safety of amusement rides and amusement devices.
References:
EN 13814-1 Design and manufacture of amusement rides and amusement devices
EN 13814-2 Operation, maintenance and use of amusement rides
EN 13814-3 Requirements for inspections during design, manufacture, operation and use
The EN 13814 series covers the entire life cycle of an amusement ride and provides technical guidance for designers, manufacturers, operators, inspectors and parties involved in amusement ride safety.
Depending on the installation context, local standards, national regulations or specific requirements established by the competent authority may also apply.
Why choose ECO Certificazioni
ECO Certificazioni is an accredited inspection body operating in accordance with UNI CEI EN ISO/IEC 17020 and is the ideal technical partner for amusement ride safety.
Through a team of highly qualified engineers and technicians, ECO Certificazioni performs technical inspections and assessments on amusement rides, supporting manufacturers and operators throughout the entire lifecycle of the installations.
We offer comprehensive services including:
design review
manufacturing inspection
initial inspection
periodic inspections
extraordinary inspections
technical testing and specialist measurements
issuance of clear, actionable reports
We operate in Italy and internationally, ensuring high standards of safety, regulatory compliance, and operational reliability.
Frequent asked questions
Amusement rides are attractions and amusement devices installed in amusement parks, funfairs, fairs, theme parks, or temporary and permanent sites.
The main European technical reference is the EN 13814 series, covering the design, manufacture, operation, maintenance, use and inspection of amusement rides.
The frequency is annual following the initial approval