Water parks
A water park is a facility dedicated to water-based entertainment, offering a wide range of attractions such as water slides, swimming pools, water play equipment and recreational areas designed for visitors of all ages.
ECO Certificazioni carries out verification, inspection and technical testing activities on water slides, water play equipment and attractions in water parks. Our services are aimed at assessing compliance with applicable regulatory requirements, helping to ensure high standards of safety, reliability and quality of the user experience .
The service
The service is intended for water park operators and manufacturers of water slides for public use who wish to ensure high safety standards and regulatory compliance.
The inspections adopt a comprehensive and integrated approach covering the entire equipment lifecycle: from design and manufacturing through to installation and operation, ensuring continuous monitoring of safety conditions in compliance with the applicable technical standards and the provisions of Ministerial Decree of 18 May 2007, as amended.
Design: design review
Manufacturing: inspection of parts and components during the manufacturing process
Installation: initial inspection and functional testing
Operation: periodic inspections to maintain safety conditions
This approach enables the safety of the attraction to be monitored and ensured over time.
What needs to be done?
The water park operator is responsible for ensuring that slides, swimming pools and water play equipment are constructed, installed, tested, maintained and operated safely.
To this end, it is necessary to ensure compliance with applicable technical standards, local regulations and the manufacturer’s instructions, as well as to plan and carry out documented periodic inspections to monitor the safety and operating conditions of the equipment over time.
What does the inspection involve?
Inspections may include document reviews, visual inspections, functional tests and technical assessments, depending on the type of attraction and the inspection stage.
Design review: correct classification of the water slide, suitability of materials, design review (assumptions, calculations, risk assessment, water flow rates, mechanical and lifting equipment, decks, stairs and platforms, electrical and safety systems), limitations
Production inspection: verification of correct implementation of the design during the production of components (materials, welds, dimensions, fiberglass production)
Initial inspection: on-site inspection of correct assembly and finishes (entrapment hazards, abrasions, safety area and interference, etc.). Functional inspections and tests, including measurement of speeds, accelerations, water flow rates, electrical safety, etc. User information and signage. Verification of documentation completeness for the operator (manuals, diagrams, activity plan, instructions, etc.).
Periodic inspection: inspection of parts subject to wear, damage, corrosion, material degradation or visible defects. Verification that the initially approved conditions are maintained (water flow rate, passenger speed, acceleration (every three years)), as well as inspection of control systems and safety devices, electrical systems, pumps and piping, etc. Instructions, limitations and signage. Retention and updating of maintenance records (activity log).
Technical report: preparation and delivery to the operator of a report covering the inspections and tests performed, results, findings and technical recommendations
We operate throughout Italy.
From North to South, we are ready to listen to you. Would you like us to call you back?
One of our sales representatives can call you with no obligation.
How often should the inspection be carried out?
The initial approval, including design review, inspection during production and initial on-site inspection, must be carried out before the amusement ride is put into operation.
It is also required in the event of:
modifications, replacements or changes to safety-critical components or parts;
changes to the ride profiles or layout;
relocation of the amusement ride to a new site.
The periodic inspection must be carried out annually, in order to verify that safety and conformity conditions are maintained over time.
Accelerometric tests must be carried out approximately every three years, unless otherwise required due to operating conditions, maintenance outcomes or specific technical instructions.
Situation - When inspection is required
New amusement ride - Before commissioning and opening to the public
Amusement ride in operation - Annually
Major modifications or work - After completion of the work and before being put back into use
Accidents, anomalies or safety concerns - Before reopening to the public
Inspections
Amusement rides and playgrounds
Inspections of public and private playgrounds, playground equipment and impact-attenuating surfaces.
Inspections
Water quality testing
We provide professional and independent services to ensure the compliance of water systems in accordance with Legislative Decree of 23 February 2023.
ECO Certificazioni carries out technical assessments and inspections of water slides and water park attractions, with specialist expertise in assessing safety, compliance, and operating conditions.
Regulatory framework
Water park operators are required to comply with the technical standards applicable to the design, construction, installation, maintenance and operation of attractions.
References:
European EN standards for the design, construction, safety and maintenance of water slides; EN 1069-1 Water Slides: safety requirements and tests methods; EN 1069-2 Water slides: Instructions
American ASTM standards for technical and safety requirements for amusement rides and recreational devices; ASTM F2376 Classification, Design, Manufacture, Construction and operation of Water Slide System.
Applicable local regulations specify the specific requirements established by the relevant country or competent authority
Manufacturer's instructions for the use, maintenance, inspections and operating limits of the attraction
Why choose ECO Certificazioni
ECO Certificazioni is an accredited certification body operating in accordance with ISO 17020.
It is the ideal technical partner for the safety of water parks and water slides.
Thanks to a team of highly qualified engineers and technicians, we support manufacturers and operators throughout all stages of the facility life cycle, from design and commissioning through to periodic inspections.
We offer comprehensive services including:
design review
production inspection
initial inspection
periodic inspections
extraordinary inspections
technical testing and specialist measurements
issuance of clear, actionable reports
In addition, we can offer a range of complementary services, such as: water quality testing, Legionella testing, and electrical system inspections.
We operate in Italy and internationally, ensuring high standards of safety, regulatory compliance, and operational reliability.
Frequent asked questions
Inspections may cover water slides and water play equipment in water parks, holiday villages, campsites, accommodation facilities or sports centres.
Periodic inspections are generally carried out annually. Additional inspections may be required in the event of modifications, relocation, anomalies, accidents, or work that may affect the safety of the amusement ride.
Responsibility for the safe operation of the attractions lies with the water park operator or the party responsible for their operation, in accordance with the applicable regulations.
Upon completion of the activities, technical reports, inspection reports, documentation of the tests performed and, where applicable, certificates of conformity may be issued.