Machinery Compliance
2006/42/EC
What we certify
The Machinery Directive 2006/42/EC establishes the essential safety requirements that every machine must meet in order to be placed on the European market.
The expertise of our technical personnel, demonstrated through accreditation and recognition as Notified Body No. 0714, ensures a prompt and practical approach to machinery conformity assessment.
What needs to be done?
The Machinery Directive identifies the manufacturer as the sole party responsible for the conformity of the machinery, demonstrated through:
- the preparation of the technical file,
- the drawing up of the EC Declaration of Conformity,
- the affixing of the CE marking to the machinery.
In the case of machinery covered by Annex IV of the Directive, the manufacturer is required to engage a Notified Body, such as ECO Certificazioni, to assess the technical documentation and the prototype before the machinery is placed on the market or put into service, which may only take place after the certificate has been obtained.
We operate throughout Italy.
From North to South, we are ready to listen to you. Would you like us to call you back?
One of our sales representatives can call you with no obligation.
What are the fields of application?
The Directive 2006/42/EC applies to a wide range of products, including:
- Machinery and partly completed machinery;
- Safety components and lifting accessories;
- Chains, ropes and webbing;
- Removable mechanical transmission devices.
As ECO Certificazioni, we operate in the main sectors covered by the Directive, particularly:
- lifting machinery;
- vehicle lifting machinery;
- ROPS and FOPS protective structures;
- logic units and safety devices with person-detection functions;
- woodworking machinery;
- refuse collection and compaction vehicles;
- machinery for underground work.
Following accreditation no. 00234 PRD, ECO Certificazioni S.p.A. obtained authorization from the Ministry of Enterprises and Made in Italy (MIMIT) to issue EC type-examination certificates in accordance with Annex IX of the Directive, thus enabling the free movement of goods within the European Community.
Certifications
Noise Compliance for Machinery and Equipment
The Outdoor Noise Directive 2000/14/EC requires noise marking for 57 types of equipment and machinery used outdoors.
Certifications
Transportable Pressure Equipment Compliance (TPED)
Directive 2010/35/EU, also known as T-PED, lays down the rules and procedures to be followed for the certification of transportable pressure equipment.
The correct application of the Directive enables the development of safe, compliant and competitive machinery, reducing risks and enhancing design quality.
Regulatory framework
Article 1 of the Machinery Directive 2006/42/EC identifies the products that must be considered “machinery” and establishes the essential health and safety requirements with which they must comply.
Article 12 of the Directive describes the conformity assessment procedures that must be followed by the manufacturer in order to demonstrate the machinery’s effective compliance with the requirements of the Directive.
Article 12 provides for three procedures depending on the type of machinery and on whether or not it is listed in Annex IV.
Conformity assessment procedures
If the machinery is listed in Annex IV and is manufactured in accordance with harmonised standards, and provided that such standards cover all relevant health and safety requirements, the manufacturer shall apply one of the following procedures:
- the conformity assessment procedure with internal checks on the manufacture of machinery referred to in Annex VIII;
- the procedure for EC type-examination referred to in Annex IX, plus the internal checks on the manufacture of machinery referred to in Annex VIII, point 3;
- the full quality assurance procedure referred to in Annex X.
If the machinery is listed in Annex IV but has not been manufactured in accordance with harmonised standards or has been manufactured only partly in accordance with such standards, or if the harmonised standards do not cover all the relevant health and safety requirements, or if no harmonised standards exist for the machinery in question, the manufacturer shall apply one of the following procedures:
- the procedure for EC type-examination referred to in Annex IX, plus the internal checks on the manufacture of machinery referred to in Annex VIII, point 3;
- the full quality assurance procedure referred to in Annex X.
ECO Certificazioni S.p.A. is a leader in the following areas:
- machinery for lifting persons involving a hazard of falling from a vertical height of more than 3 metres, mobile elevating work platforms (EN 280), lifting platforms for persons with disabilities, and goods/passenger lifts.
- machinery for lifting vehicles for maintenance, repair and inspection purposes (EN 1493).
- ROPS and FOPS protective structures, as well as TOPS and front guards, such as cabs and roll-over bars; ECO performs destructive testing on prototypes in accordance with technical standards harmonised under the Machinery Directive.
- Programmable logic units with safety functions.
- Safety devices and devices for the detection of persons.
- Woodworking machinery.
- Refuse collection and compaction vehicles.
- Machinery for underground work.
For further details, please visit the official EU NANDO website – New Approach Notified and Designated Organisations.