Certifications

Transportable Pressure Equipment Compliance (TPED)

Directive 2010/35/EU, also known as T-PED, lays down the rules and procedures to be followed for the certification of transportable pressure equipment.
Mandatory, but stress-free: certifications and inspections required by law, handled with simplicity and clarity.

2010/35/EU


What we certify

The T-PED Directive 2010/35/EU defines the safety and conformity requirements for transportable pressure equipment, such as cylinders, tanks and battery vehicles, ensuring their safe use and free movement within the European Union.

What needs to be done?

Transportable pressure equipment, such as cylinders, tanks and gas containers, must bear the π (pi) marking in order to be placed on the market and used within the EU.

The T-PED Directive requires manufacturers and operators to:

  • design and manufacture equipment in compliance with the requirements of Annex I to Directive 2008/68/EC (ADR);
  • have it undergo conformity assessment by a Notified Body;
  • carry out periodic, intermediate and exceptional inspections to ensure continued compliance with safety requirements;
  • reassess equipment belonging to the so-called “existing fleet”, manufactured before the T-PED entered into force, in accordance with the procedures laid down in Ministerial Decree 18.06.2015.

We operate throughout Italy.

From North to South, we are ready to listen to you. Would you like us to call you back?

One of our sales representatives can call you with no obligation.

What are the fields of application?

Directive T-PED 2010/35/EU applies to all pressure equipment intended for the transport of compressed, liquefied or dissolved gases, including:

  • gas cylinders and cartridges;
  • tanks for LPG or dangerous goods;
  • battery vehicles and multiple-element gas containers (MEGCs);
  • taps, valves and accessories for transportable pressure receptacles.

Our inspectors assess and inspect both newly manufactured and in-service equipment, carrying out inspections at customer premises, testing centres and filling plants.

We ensure that every receptacle maintains its safety, integrity and regulatory compliance over time, guaranteeing operational continuity and confidence for manufacturers, logistics operators and end users.


Regulatory framework

The 2010/35/EU Directive, also known as T-PED, which replaced 1999/36/EC, establishes the rules and procedures to be followed for the certification of transportable pressure equipment.

The T-PED Directive governs the design, manufacture and conformity assessment of transportable pressure equipment, with the aim of improving its safety and ensuring its free movement within the EU market.


Conformity assessment procedures

The requirements for products subject to assessment are defined with reference to Annex I to Directive 2008/68/EC, known as the ADR. The international carriage of dangerous goods by road is regulated at European level. This Agreement, consisting of a text comprising a limited number of articles, includes two Annexes (Annex A and Annex B), which contain all the regulatory provisions that must be complied with for the carriage in question.

The role of the Notified Body

ECO is a Notified Body designated by the Ministry of Infrastructure and Transport and can carry out Conformity Assessment activities pursuant to T-PED Directive 2010/35/EU for the purposes of:

  • approval and authorization for placing newly manufactured transportable pressure equipment on the market
  • reassessment of the conformity of existing transportable pressure equipment already on the market that does not bear the conformity marking but is eligible for reassessment under T-PED
  • carrying out periodic inspections to verify that the safety requirements necessary for the reuse of transportable pressure equipment continue to be met.

Upon completion of the inspections, inspection reports or an inspection certificate are issued, summarizing the outcome of the assessments performed and whether or not the equipment may enter / remain in service.

In the case of new or reassessed equipment, the manufacturer affixes the π marking followed by the notified body number (0714 for ECO Certificazioni).

Inspection of "existing fleet" equipment

Legislative Decree No.  78 of 12 June 2012, transposing and implementing Directive 2010/35/EU, known as T-PED, established the regulatory framework for the approval and periodic inspection of newly manufactured transportable pressure equipment; however, equipment manufactured previously and approved in accordance with the procedures established by the Royal Decree of 12 September 1925 and subsequent supplementary regulations, concerning the approval of the regulations governing tests and inspections of receptacles  intended  for  the carriage by rail of compressed, liquefied or dissolved gases, remained excluded from the scope of periodic inspections for maintaining such equipment in service. Responsibility for maintaining this equipment remained with the INAIL inspection body.

The Decree of 18.06.2015 of the Ministry of Infrastructure and Transport, with the primary aim of  harmonizing activities in the field of the manufacture,  approval and continued service of transportable  pressure equipment,  authorizes third-party bodies to conduct  conformity assessments,  periodic inspections, intermediate  inspections,  exceptional  inspections  and   supervision   of in-house inspection services for equipment, and establishes the procedures for bodies to apply for recognition and for authorization to be granted.

ECO is a Type A Inspection Body (accreditation 00234 ISP) and a Notified Body (No. 0714), authorized by the Ministry of Infrastructure and Transport (MIT) for the following activities:

  • Certification pursuant to Annex III to Directive 2010/35/EU;
  • 1.8.7.3 (ADR) Supervision of manufacture;
  • 1.8.7.4 Initial inspection and tests;
  • 1.8.7.6 Periodic inspections, intermediate inspections and exceptional checks;
  • 1.8.7.7 Authorization and supervision of in-house inspection services.

Would you like more information?

Whether you have a question, a request, or would like to know how we can support you, fill out the form.
We will get back to you with all the answers you need.