Factory Production Control for Metal Carpentry
What we certify
Since 1 July 2014, manufacturers of structural steel or aluminium components have been required to affix the CE marking in accordance with the EN 1090-1 standard.
At ECO Certificazioni, we support companies throughout this process by assessing product conformity and issuing the certification required for CE marking.
What needs to be done?
Manufacturers of structural components must implement a Factory Production Control (FPC) system to ensure that products placed on the market conform to the declared performance.
This system includes inspections, tests and documented procedures to ensure compliance with EN 1090-1 and its technical parts, EN 1090-2 (steel structures) and EN 1090-3 (aluminium structures).
At ECO Certificazioni, we verify the proper operation of the FPC system and, if required, can combine the audit with ISO 3834 certification for welding processes.
We operate throughout Italy.
From North to South, we are ready to listen to you. Would you like us to call you back?
One of our sales representatives can call you with no obligation.
What are the fields of application?
CE marking according to EN 1090 applies to all structural steel and aluminium components manufactured in a workshop and intended for installation in construction works, such as buildings, bridges or metal structures.
However, machine or industrial plant components, as well as products already covered by other harmonised technical specifications, do not fall within the scope of the standard.
We are available to help you assess, on a case-by-case basis, the need for certification and the correct application of the standard, ensuring a clear, compliant process tailored to your production requirements.
Certifications
Welders, brazers and permanent joining processes
Through the Certification of the competence of welders and operators of automatic welding processes, operators demonstrate their ability to produce joints that comply with the applicable standards.
Certifications
Welding quality
The ISO 3834 standard defines the requirements that manufacturers must meet in order to operate in accordance with good manufacturing practice.
Certifications
Quality Management System
ISO 9001 is the world's most widely adopted standard for organizations seeking to enhance and efficiently and effectively manage their production processes and the services they provide to the public.
Our goal is to ensure that every component intended for building or engineering structures meets the highest standards of safety, quality and reliability.
Regulatory framework
The standards in the EN 1090 series are the reference standards for the manufacture and supply of structural steel and aluminium components. They cover all stages from design through to supply for installation.
The harmonised standard EN 1090-1:2009 + A1 November 2011 “Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components” describes the requirements and procedures for affixing the CE marking, in accordance with European Regulation (EU) No. 305/2011.
For the manufacture of components, EN 1090-1 refers to two related standards that specify the technical requirements for their correct execution in the workshop:
- UNI EN 1090-2:2018 “Execution of steel structures and aluminium structures – Part 2: Technical requirements for steel structures”;
- EN 1090-3:2019 “Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures”.
CE marking according to EN 1090-1 is mandatory when supplying components manufactured in a workshop and intended for use on construction sites in the construction of buildings and other civil engineering works.
This series of technical standards covers elements intended to form part of steel and aluminium structures, kits of components intended for subsequent assembly and installation, and structural metal elements that will subsequently be used on construction sites to create composite steel-concrete structures.
Product marking applies to structural components manufactured at a production facility and not to structures constructed on site.
In many cases, the actual applicability of EN 1090 must be verified. Structural components of machinery and equipment, for example, are not covered by the Construction Products Regulation and therefore marking according to EN 1090-1 is neither required nor permitted. Various metal products for structural use, such as anchors or rolled sections, are already covered by other harmonised standards; consequently, where applicable, marking must be carried out with reference to another technical specification.
Quality requirements for welding processes according to ISO 3834
Manufacturers producing steel and aluminium components using welding processes must, for the control of these processes, refer to the requirements of the standards in the ISO 3834 series, in addition to the specific requirements defined by EN 1090-2 and EN 1090-3.
For this reason, factory production control integrates the requirements of both standards, and companies often choose certification according to EN 1090 together with certification according to ISO 3834. In any case, the FPC system must take the requirements of both standards into account.
ECO Certificazioni performs audits covering both EN 1090 and ISO 3834 and issues certifications according to both standards.
If, in addition to manufacturing components in the workshop, the manufacturer also carries out assembly involving on-site welding operations, certification according to ISO 3834 for on-site welding processes is required by the Ministerial Decree of 17 January 2018, Technical Standards for Construction.
Other applicable standards
The standards in the EN 1090 series refer to many other technical standards relating primarily to materials, production processes, inspections and personnel qualification.
With regard to welding processes, EN 1090 requires the qualification of welding procedures and personnel. The applicable references are generally the ISO 15614 and ISO 9601 series of standards. ECO Certificazioni operates in the field of welding qualifications.
Conformity assessment procedures
Manufacturers and suppliers of structural steel and aluminium components must implement Factory Production Control (FPC) within their organization to ensure that the products supplied comply with the declared performance. This therefore involves procedures, inspections and tests designed to ensure control over manufacturing processes.
Companies often incorporate FPC into their Quality Management System in accordance with ISO 9001. For this reason, certification activities can also be carried out concurrently, improving efficiency and reducing costs. However, it is not necessary to apply ISO 9001 requirements to FPC, as the EN 1090 series of standards specifies how FPC must be organized and documented.
Before starting the production of structural components in accordance with FPC, the manufacturer carries out a comprehensive series of tests and verification procedures known as Initial Type Testing (ITT). These tests are intended to verify the ability to manufacture structural components and kits in compliance with the standard.
These mainly include checks on samples from production orders, process qualification tests, verification of material characteristics, as well as structural sizing and calculations when performed by the manufacturer.
When supplying components and kits, the manufacturer must provide the marking and Declaration of Performance with the supply. The Declaration of Performance (DoP) is not the Declaration of Conformity normally required by Directives for other types of products. Through the DoP, the manufacturer declares the performance values guaranteed by the products in relation to certain essential characteristics, such as the mechanical characteristics of the base materials used for manufacturing, the load-bearing capacity of the components, and others.